Thermal Infrared Camera and Borescope Inspection in San Dimas, CA

Thermal Infrared Camera and Borescope Inspection

Infrared Imaging and Cavity Access

Thermal imaging reads surface temperature differentials across walls, ceilings and floors. Because evaporating moisture cools a surface, water that has migrated inside an assembly shows up as a distinct thermal pattern long before it becomes a visible stain. Borescope inspection complements this by putting a camera directly inside a wall cavity, soffit, chase or subfloor void through a small access port, giving us a live view of framing, insulation and the back side of finishes without opening the assembly.

Thermal Infrared Camera and Borescope Inspection

How We Interpret the Data

An infrared camera detects temperature, not water, so every thermal anomaly is verified with a moisture meter before it is called damage. Our technicians control for the conditions that produce false readings: HVAC supply runs, recessed lighting, plumbing lines, missing insulation, sun-loaded exterior walls and thermal bridging at framing members. Where the camera and the meter agree, we open a borescope port to confirm visually. Where they disagree, we investigate further rather than assuming.

Thermal Infrared Camera and Borescope Inspection

Where It Pays Off

This combination is decisive on slow supply-line leaks, roof and window intrusions with long migration paths, multi-story losses where water has tracked down through framing, and post-drying verification that a cavity is genuinely dry. It also protects historic finishes, custom millwork and tile installations that would be destroyed by exploratory demolition. Imagery and readings are delivered as part of your file for both the remediation plan and the claim.

We proudly offer Thermal Infrared Camera and Borescope Inspection in San Dimas, CA and nearby areas.

Other services in San Dimas, CA

Non-Destructive Detection and Inspection
San Dimas, CA
Before a single piece of drywall comes out, we build a complete picture of what the damage actually is and how far it has traveled. Restotech uses non-invasive diagnostic equipment to read moisture, temperature and air quality behind finished surfaces, so the scope of work is driven by evidence instead of guesswork. This matters most in occupied homes, tenant-occupied units and commercial spaces where unnecessary demolition means lost time, lost revenue and a larger insurance claim than the loss actually warrants.
View details
Moisture Mapping
San Dimas, CA
Moisture mapping converts a water loss into measurable data. We record moisture content readings at fixed, repeatable points across every affected material, plot them against a dry standard established from unaffected material of the same type in the same structure, and draw the true boundary of the wet area. Water migrates by capillary action along framing, under flooring and through insulation, so the visible wet spot is almost never the real perimeter.
View details
Microbial Identification and Assessment
San Dimas, CA
Not every dark stain is mold, and not every mold problem is visible. Microbial assessment establishes whether microbial growth is present, what type it is, how much of the structure it affects and what conditions are sustaining it. Restotech performs the field assessment and coordinates laboratory analysis so the remediation scope is built on findings, not on assumptions, and so you are not paying to remove something that does not require removal.
View details
Subcontracted Specialty Services: Lead and Asbestos
San Dimas, CA
Buildings constructed before 1978 frequently contain lead-based paint, and asbestos was used in drywall joint compound, floor tile and mastic, popcorn ceilings, pipe and duct insulation, roofing and stucco well into the 1980s. Disturbing these materials during a restoration is a regulated activity with real legal and health consequences. Restotech identifies the risk at the inspection stage and brings in licensed specialty contractors before any demolition begins.
View details
Mold, Fungi, Bacteria, Smoke and VOC Testing
San Dimas, CA
Indoor air quality complaints rarely have a single cause. A property may carry fungal growth in a wall cavity, bacterial contamination from a sewage backup, residual smoke particulate from a fire, and elevated volatile organic compounds from building materials or cleaning products at the same time. Restotech evaluates the full range of contaminants together, so you are not solving one problem while the actual source of the complaint goes untouched.
View details
Basement Waterproofing
San Dimas, CA
A basement that floods repeatedly does not have a drying problem, it has a water management problem. Restotech addresses the hydrostatic pressure, grading, drainage and envelope failures that let water into below-grade space in the first place. Waterproofing turns a recurring emergency into a controlled, engineered system, and it protects everything stored, finished or mechanical that lives below grade.
View details

Other services in other locations

Non-Destructive Detection and Inspection in Torrance, CA
View details
Non-Destructive Detection and Inspection in Culver City, CA
View details
Non-Destructive Detection and Inspection in Hacienda Heights, CA
View details
Non-Destructive Detection and Inspection in Los Angeles County, CA
View details
Moisture Mapping in Torrance, CA
View details
Moisture Mapping in Culver City, CA
View details

We Cover miles, around 46 cities

Select a location

Choose a city from the tabs above to view its map.